User Avatar Image

My Guide To Running Sam & Max On Linux

posted by Cassidy on - last edited - Viewed by 1.9K users

Had recently upgraded from XP to Ubuntu 7.10, but unfortunately hadn't finished Season 1 or started Season 2. After receiving Season 1, the soundtrack and Surfin' The Highway in the mail, I decided it was time to get the games to run on WINE. Several hours later, this guide was born. I cannot guarantee full playability, but it has been working so far. Hope anyone who uses my guide will have the success I did and I hope I'll be able to help any questions.

As it is attached, you may also download the PDF from Filefront.

==============================
A Guide To Sam & Max On Wine/Ubuntu
==============================
This is a guide to getting Sam & Max, Seasons 1& 2 to run on your copy of Ubuntu.

NOTE: These steps are being done on a clean install of Ubuntu & Wine (yes I nuked my operating system just for you guys :)), but I will be available to hopefully help you with technical questions. Unfortunately, I don't guarantee full playability, just getting the game to run.

This guide is usable with both the downloadable & so far, only the DVD version straight from Telltale. If you plan on installing a combination of the DVD and the Downloaded versions, I would suggest installing the downloaded episodes first, and then install from the DVD.

This guide contains logical steps & common terminal commands in this format. Some of these directory locations will vary upon your computer setup :).

PRE-INSTALL STEPS
=================
1. Install & Update Ubuntu. Hopefully you have this done already.
2. Install WINE 0.9.5.5: (Taken from http://www.winehq.org/site/download-deb)
a. Open Terminal. Add the repository's key to your system of trusted APT keys, wget -q http://wine.budgetdedicated.com/apt/387EE263.gpg -O- | sudo apt-key add -
b. Add the repository to your system's list of APT Sources, sudo wget http://wine.budgetdedicated.com/apt/sources.list.d/gutsy.list -O /etc/apt/sources.list.d/winehq.list
c. Install WINE via Synaptic Package Manager, or by running sudo apt-get update to update APT's package information, and then sudo apt-get install wine to actually install WINE.
3. If you are having problems, Start here by nuking your .wine, via command: rm -r ~/.wine I have nuked mine several times over to figure all this out :).

CD VERSION
==========

What I Used: Ubuntu 7.10 (gutsy), WINE 0.9.55, Sam & Max Season 1 & SecurRom Patch from Telltale.

1. Download the Season 1 SecurROM Patch
a. Open Terminal.
b. Navigate to where you want to download the SecurROM patch eg, cd ~/Downloads
c. Download SamMaxSeason1_SecurROM_1.0_TTG.exe from http://files.telltalegames.com/support/SamMaxSeason1_SecurROM_1.0_TTG.exe, either through firefox or, wget http://files.telltalegames.com/support/SamMaxSeason1_SecurROM_1.0_TTG.exe
d. Leave Terminal Open, we will be back shortly.

2. Insert Sam & Max Season 1 DVD

3. Setup Wine:
a. Run 'Configure Wine'. Click the Following Tabs:
i. Applications Tab: Change Windows Version to 'Windows XP'.
ii. Graphics Tab: Make sure 'Allow window...' & 'Allow Pixel...' are checked. Make sure 'Vertex Shader Support' is set to 'Hardware'
iii. Audio Tab: You should receive a recommended driver selection notice. Click OK &b click Apply. Click OK.

4. Install Sam & Max:
a. Back to Terminal, and navigate to your cdrom, cd /media/cdrom Run Setup.exe with WINE, wine setup.exe. Install with default options. When done installing, uncheck 'Run Sam & Max - Season 1.0'
b. Navigate to where you downloaded your patch, cd ~/Downloads and run it using wine, wine SamMaxSeason1_SecurROM_1.0_TTG.exe Click Next & I Agree.

5. Cleanup:
a. Run 'Configure Wine'. Click on the 'Drives' Tab. Click on the 'Z: /' line under 'Drive Mappings'. Click the 'Remove' button. Click OK. (Essentially remove the / drive mapping)

6. Run Sam and Max:
a. Back to Terminal!
b. Navigate to the Sam & Max Season One Directory, ~/.wine/drive_c/Program Files/Telltale Games/Sam and Max – Season One, cd ~/.wine/drive_c/Program\ Files/Telltale\ Games/Sam\ and\ Max\ -\ Season\ One
c. Navigate to the Episode you want to play, this case: Episode 1 – Culture Shock, cd Episode\ 1\ -\ Culture\ Shock\ Data
d. Run the Episode with WINE, this case: SamMax101, wine SamMax101.exe

e(optional). If it seems like it's running slower than in windows:
i. Press ALT+F4
ii. Run Episode in desktop mode, at desired resolution, wine explorer /desktop=SamMax,1024x768 SamMax101.exe It should start up in a window.
iii. Should now be able to navigate to Options & Change Resolution to desired and hopefully will run at desired speed.
iv. If after changing resolution, graphics go all “broken window”, press ALT+F4 and run again with command from ii., should be fine :).

DOWNLOADABLE VERSIONS
========================

What I Used: Ubuntu 7.10 (gutsy), WINE 0.9.55, ies4linux 2.99.0.1, Sam & Max Seasons 1 & 2 Downloadable Editions from 'Your Games' under the 'Past Purchases' section of your Telltale Login. I will also organize this part in such a way that if the Flash Bug still affects your Firefox, you will still be able to download the games with IE instead. Although, the Demos will also work fine :).

1. Setup IES4Linux
a. Open Terminal.
b. Navigate to where you want to download ies4linux, cd ~/Downloads
c. Download ies4linux-2.99.0.1.tar.gz from http://www.tatanka.com.br/ies4linux/downloads/ies4linux-2.99.0.1.tar.gz, either through firefox or, wget http://www.tatanka.com.br/ies4linux/downloads/ies4linux-2.99.0.1.tar.gz
d. Unpack ies4linux-2.99.0.1 and navigate to the directory, tar -zxvf ies4linux-2.99.0.1.tar.gz && cd ies4linux-2.99.0.1
e. Install CabExtract either through Synaptic Package Manager or, sudo apt-get install cabextract
f. Install ies4linux, ./ies4linux Click OK. When done, Click Close.

2. Nuke WINE & Copy Ies4Linux
a. In terminal remove your .wine directory & copy the ie6 directory from the .ies4linux into it, rm -r ~/.wine && cp -r ~/.ies4linux/ie6 ~/.wine

3. Setup Wine:
a. Run 'Configure Wine'. Click the Following Tabs:
i. Applications Tab: Change Windows Version to 'Windows Vista'.
ii. Graphics Tab: Make sure 'Allow window...' & 'Allow Pixel...' are checked. Make sure 'Vertex Shader Support' is set to 'Hardware'
iii. Audio Tab: You should receive a recommended driver selection notice. Click OK & click Apply. Click OK.

4. Run Internet Explorer & Download Sam & Max
a. In Terminal, run IE6, ie6
b. Go to Telltale Games, Login and download the episodes. In this case, I downloaded SamAndMax202_MoaiBetterBlues_Setup.exe into my Downloads folder in my Home directory.

5. Install Episodes
a. In Terminal, navigate to where you downloaded your episode, cd ~/Downloads and run it using wine, wine SamAndMax202_MoaiBetterBlues_Setup.exe
b. Install with default options. When done installing, uncheck 'Play Now'

6. Run Sam & Max
a. Back to Terminal!
b. Navigate to the Sam & Max Season Two Directory, ~/.wine/drive_c/Program Files/Telltale Games/Sam and Max – Season Two, cd ~/.wine/drive_c/Program\ Files/Telltale\ Games/Sam\ and\ Max\ -\ Season\ Two
c. Navigate to the Episode you want to play, this case: Episode 2 – Moai Better Blues, cd Episode\ 202\ -\ Moai\ Better\ Blues
d. Run the Episode with WINE, this case: SamMax202, wine SamMax202.exe
e. You should be able to enter in your Telltale login information. Click Log me in! To Start the game, you just have to click a little below the Logo of the game, bout an inch or so and it should start up.

f(optional). If it seems like it's running slower than in windows:
i. Turn full screen off during the intro-setup process either through options or by pressing ALT+ENTER. Usually the graphics go “broken glass” so ALT+F4. By running the program once more and it should start up in a window and at full speed.

Thank you for reading my guide! I hope that I was helpful and please contact me with any questions.

79 Comments - Linear Discussion: Classic Style
  • For the "ice station santa" problem, could the steam version be the solution?
    Do anybody know if the splash screen is present on the steam version?
    (I didnt find a demo version on steam)

  • The Splash Screen is the activation system, so no, the Steam versions don't use the launcher. Then again, does Steam even work in Ubuntu, even with WINE :confused:

  • Steam works nearly perfectly in Wine and so do all of the Source engine games. :)

  • HI.
    this is what i get when I play season one in linux:
    schermataae6.th.png
    what can I do? :confused:

  • Whoa! That's cool - invisible walls!

  • After some playing around, I managed to get all the Sam and Max games going on my Ubuntu AMD64 machine. I discovered that when launching the game itself, you need to set:

    WINEDLLOVERRIDES=\"rpcrt4,ole32,d3d8,d3d9=b\"

    in the environment when calling Wine, at least with recent versions - otherwise Wine will load the wrong DLLs (thanks, IE) and puke all over itself. For example, when launching Episode 101, I do this:

    WINEDLLOVERRIDES=\"rpcrt4,ole32,d3d8,d3d9=b\" setarch i686 wine explorer /desktop=SamMax,800x600 ./SamMax101.exe

    setarch may or may not be needed, but I'm being extra careful. Once I get past the initial splash screen, it runs just fine (and much smoother in its little virtual desktop window).

  • And of course, Telltale's other games (at least thus far) seem to function equally well under Wine, aside from the splash screen rendering problems. (mumble mumble IE)

  • Has anyone figured out a way of running 201 - Ice Station Santa - in wine yet? This is really bugging me a lot. I just finished playing Season 1 and can't wait to get into Season 2.

    And as far as I've gathered, the rest of Season 2 works like a charm in wine... but starting on Episode 2 just is not an option in my mind.

  • @HellMoose said: Has anyone figured out a way of running 201 - Ice Station Santa - in wine yet? This is really bugging me a lot. I just finished playing Season 1 and can't wait to get into Season 2.

    And as far as I've gathered, the rest of Season 2 works like a charm in wine... but starting on Episode 2 just is not an option in my mind.



    It ran just fine for me, as well as the rest of season 2 (just finished the last one, in fact). What makes you say it doesn't work? Just make sure you have the latest installer, and it should work.

  • Well I finally found time to have a go at season 2 today. With ies4linux, I get an "automation server can't create object" error (which comes from IE) and can't get past the "please wait" screen, but with Gecko, I can pop in my serial, restart when it crashes and then I'm good to go.

    Except for Ice Station Santa that is (which is odd, because I know I had the demo running earlier this year). Demonfoo, when you say "latest installer", do you mean the normal installer from the "My Games" section or something you've found elsewhere?

Add Comment